Evolution Gun Works Sig Sauer M17/M18 Optics Ready Adapter Plate

EGW red dot sight adapter plate for the Sig Sauer M17 and M18 allows you to mount a Vortex Viper, Vortex Venom, Burris Fastfire or other Docter footprint red dot sight to your Sig Sauer M17 and M18 with the Romeo1Pro factory cut slide. Please confirm your model before purchasing. The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. This Optics Mounting Plate Fits the Following Pistols: Sig Sauer M17 (with Romeo1 PRO cut) Sig Sauer M18 (with Romeo1 PRO cut) Sig Sauer P320 X-Five Legion (with Romeo1 PRO cut) Sig Sauer P320 X-Carry Optics Ready (with Romeo1 PRO cut and no rear sight cut) Sig Sauer P320 X-Compact (with Romeo1 PRO cut and no rear sight cut) This Optics Mounting Plate Does Not Fit the Following: Any Sig Sauer P320 models with dovetail cut for rear sight Sig Sauer P320 RX Sig Sauer P320 RX X-Compact Sig Sauer P320 X-Five (with Romeo1 cut) Sig Sauer M17 Military Surplus Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.775″ Overall Width: .99″ Torque Specs: 15 in/lbs Mounting Hardware: (2) 6-32 x 5/16″ Button Head Screws – Requires 5/64 Wrench or Driver (2) 6-32 x 3/8″ Flat Head Screws – Requires 5/64 Wrench or Driver (2) 4-40 x 1/4″ Socket Cap Head Screws – Requires 3/32 Wrench or Driver Red Dot Fitment: Viridian RFX25 Vortex Viper Vortex Venom Burris FastFire Burris FastFire 2 Burris FastFire 3 Burris FastFire 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot Installation Instructions – Remove the optics plate from your slide – Install the EGW adapter plate – Place the red dot sight on the EGW red dot adapter plate (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) – Apply blue Loctite to the provided mounting screws – Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer’s warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Specifications for Evolution Gun Works Sig Sauer M17/M18 Optics Ready Adapter Plate: Manufacturer: Evolution Gun Works Color: Black Gun Model: SIG Sauer M17, SIG Sauer M18 Gun Type: Pistol Length: 1.775 in Fabric/Material: 7075 Aluminum Width: 0.99 in Gun Make: SIG Sauer Red Dot Sights-Footprint: Deltapoint Pro Package Contents: Evolution Gun Works Sig Sauer M17/M18 Optics Ready Adapter Plate