Warne’s one-piece QD XSKEL cantilever mount features Patent Pending Dual Quick Detach levers and is constructed from 6061 T6 aluminum for a lightweight and rigid foundation. Steel threaded inserts ensure steel-on-steel contact between all threaded interfaces, and MSR Ideal Height helps the shooter maintain a proper cheek weld and shooting position with any optic on flat top guns. The QDXSKEL gives you a generous forward cantilever making it the best MSR scope mount for an Low Power Variable Optic (LPVO) and 24-56mm objective scopes while reducing weight with its skeletonized design and the Return-to-Zero performance known for Warne. Count on a Warne QD scope mount to give you excellent performance and versatility. At Warne Scope Mounts, we have led the industry with innovative design, and this QD X-SKEL cantilever mount is an excellent example. The patent-pending design in this one-piece 30mm MSR mount gives you outstanding scope placement for an ideal cheek weld and shooting position on most modern sporting rifles. The quick detach levers give you reliable return-to-zero performance, and 6061/T6 aluminum offers lightweight strength. Warne Engineered the QDXSKEL to be light in areas where it could be. Still, thick and heavy duty in the places where it needs to be, making it a durable and lightweight scope mount for low-power variable optics or variable scopes with a 24-56mm objective. Specifications for Warne Quick Detach XSKEL Mount: Manufacturer: Warne Finish: Anodized Fabric/Material: 6061 T6 Aluminum Base/Mount Type: Quick Detach Weight: 8.02 oz Condition: New Features: Patent Pending Dual Quick Detach levers for fast installation and removal Lightweight, Skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability. #8 Torx style fasteners with steel threaded inserts to prevent stripping. Extended design provides over 2 inches of forward cantilever for additional eye relief. Places the optic at the IDEAL HEIGHT for MSR and similar style platforms Available in 1 inch, 30mm & 34mm, Black or Dark Earth Package Contents: Warne Quick Detach Gen 2 Extended Skeletonized MSR Mount
6 reviews for Warne Quick Detach XSKEL Mount
Only logged in customers who have purchased this product may leave a review.
Related products
Biden sucks –
I have 5 of these mounts and have never had a problem with any of them. Pretty lightweight, and easy set up. The seem to hold zero very well too. I like the a lot because I tend to switch scope around on my guns a lot. It makes it very easy to switch between a therm and traditional scope without losing your aim point.
Orlando –
Initially, I settled and ordered a more affordable mount. The next morning I changed my mind and decided to pay a bit extra for what I really wanted. Optics Planet’s excellent customer service helped me make that happen. I am really satisfied with my order. Will order from OpticsPlanet again.
Ed –
Really like this mount. Seems very solid. Adjustmentsare easy. Attached solid to 2 different pic rails.Warne is a US company with decent prices & smart engineering. I bought a pair of single QDrings & they are great also.
Michael Ray Lobato –
The Warne line has been in my scope collection from the PR5, Vortex Strike Eagle FFP, and finally to the Vortex Straight-wall 350 Legend which is what this Warne mount with QD levers is for. I recently wanted to start removing the scope from my hunting rifle and was absolutely impressed with the Warne line-up of mounts, but when I mounted the Vortex to the QD levers and with the ease of taking it on and off I was sold on this style of mount.
Rick –
I always like to preface reviews by saying I own NF, Vortex, and Trijicon optics. I like quality and know the benefits as I started out years ago with lower quality products. So I speak with experience. Long range shooter here, 300 – 1k+ yards is a typical shoot. For the guy who doesn't want to read, just buy them! These mounts are rock solid! I've got two Trijicon LPVO's and decided to buy these for each of my AR's. They are American made quality mounts and I haven't had a single issue with them! They're easy to adjust and don't move once you've dropped those levers. Now someone in the reviews complained about the mount not being the right size for their scope and gave the mount a 1 star rating. That's your fault for not researching. Call a company if you don't know. Another review said their mount was rusty. That's too bad. But I'm sure OP will take care of it and that's extremely rare with quality made products. As far as the two sets I received, the fit and finish were excellent. I always lap a new pair of rings but when I attempted to lap these the material that was removed was almost nil! They were practically perfect. I use Wheeler Eng kits. The rods with the points were touching when I dropped them in these mounts. Perfectly aligned! I build my AR's like the dollar's going to collapse the following week. I don't care to waste my time on something that's going to fail when I need it the most. Also with these being QD you can drop an optic if it gets unusable and keep clearing structures or at distance with BUIS. But w/o a QD you better have some 45 mounts or you're just carrying extra weight with typical sights. If you've got an $800-2,000 optic, why are you using a $70 pair of rings? You'll get a lot more quality when you get to the 150-180 range in my experience. These Warne mounts are next level w/o next level prices. There's a point where you're getting diminished returns. To me, anything above this is that point. If a scope is mounted properly with rings that are made w/ quality material and fasteners, CNC machined, that's all you need for a scope to hold zero and point of aim! You're not getting anything more for $250, 350. It's a mount. It's not a CHF barrel or adjustable trigger. If it's solid, it's doing what any quality mount is going to do! Buy these and be done and move on to the next decision!
gmark –
Though I had to put a response on if I would recommend this, I'm not actually at the point whether I would or would not yet. Following the instructions on the screw tension isn't good enough. I found out you had to follow the instructions, shoot your rifle, then follow the instructions again. With that said, it seemed to have held its tension the second time. In addition, it scratches really easy. I was simply screwing down the caps and that was enough to put scratches on it. Other than that, I will say it does seem to be pretty good quality. I think it looks sharp too. Overall, I'm still happy with it.