The Strike Industries T1 Riser Mount for AR Platforms, Steel is a low profile, lightweight, T1 mount for AR platforms. Set at the ideal height for an absolute co-witness or lower 1/3 utilizing an additional spacer. The Strike Industries T1 Riser Mount for AR Platforms, Steel is versatile while providing shooters with an excellent option for all T1 compatible optics. With its modular design, you are able to mount your optics at your preferred heights. Specifications for Strike Industries T1 Riser Mount for AR Platforms, Steel: Manufacturer: Strike Industries Finish: Type III Hardcoat Anodized Length: 23.6 mm Height: 25.6 mm Weight: 2.3 oz Fabric/Material: Steel Condition: New Gun Make: AR Platform Red Dot Sights-Footprint: Not Applicable Features of Strike Industries T1 Riser Mount for AR Platforms, Steel Low profile rail riser Lightweight, 2.3 oz total installed co-witness height. Lower 1/3 Co-witness Absolute Co-Witness Package Contents: Strike Industries T1 Riser Mount for AR Platforms, Steel 1X Single Use Locktite 1X 4mm Hex key 1X T10 Torx Wrench 4X M3 x 0.5mm Thread x 24mm Length Screws 4X M3 x 0.5mm Thread x 28mm Length Screws 1X Rail Mount Base 1X Lower 1/3 Height Spacer 1X Absolute T1 Mount
6 reviews for Strike Industries T1 Riser Mount for AR Platforms, Steel
Only logged in customers who have purchased this product may leave a review.
Related products
Ray S –
After several weeks of research I ordered the Strike Industries T1 Riser Mount to pair with a Sig Romeo5 optic on my Savage MSR Recon. I wasn’t happy with the stock riser due to its height. I’m 6’1 and was having to cheek press very hard in order to center the red dot while looking through my prescription eyeglasses. With the T1 at 1/3 co-witness, I can still get a good press while centering the red dot easily. Unfortunately there’s no information as far as the height for absolute and 1/3 co-witness on Strike Industries site. I even reached out to Optics Planet and didn’t get a response so I was hesitant to order but I’m glad I did. The optic is now roughly 1/4” taller than the factory Sig mount. I don’t run any BUIS so I can’t speak for them being 1/3 co-witness. The package comes with two sets of different length machine screws, blue Loctite and an Torx and Allen wrench. I had no issue installing the screws and everything fit perfectly. There’s also a protruding notch on the underside of the mount that fits in between the Picatinny rail slots so there’s absolutely no front or back movement like the Sig factory mount. The cross mounting screw is also larger in diameter compared to the undersized factory screw. You can’t beat it for the price given the fact that you have the option to use the mount at two different heights. Fit and finish is top notch, I wouldn’t hesitate to order again. This is my second Strike Industries product, second being a charging handle with extended latch.
Jim C –
So the build quality is great. However when using the lower 1/3 riser; it sat the sight too high and I only had the tip of the sight showing. When I took off the 1/3 and went with absolute cowitness it was actually 1/3.
John Laggner –
I bought this for the SIG ROMEO 5 for a lower 1/3 cw and the SIG factory tall mount it absolute. This riser with the ROMEO 5 is lower 1/3 without the extra spacer (i.e. only the spacer labeled "absolute" installed). With the lower 1/3 riser it almost completely obscured the irons. For reference I'm using the DD fixed irons.Overall the construction feels solid, but that will be proved over time. I like that they gave you everything you need for install including the allen key, torx key, a set of long screws, a set of long screws, and loctite blue (I used my own and only a very very little amount). Overall I would recommend if you are looking for a lower 1/3 co.
Todd Michaud –
Solid mount for your optic with a couple of options for height had a great price
Todd Michaud –
Solid mount for your optic with a couple of options for height had a great price
Vino –
Its not a lower 1/3 cowitness like stated in the description…you can barely see the irons through the red dot but thats ok. And dont believe the folks that rate this pow saying its the mounting screws fault for stripping out…its user error…the screws are just fine